Skip to main content

The ASR (Analyte Specific Reagent) Rule

As per 21 CFR 864. 4020(a), ASRs are defined as antibodies, both polyclonal and monoclonal, specific receptor proteins, ligands, nucleic acid sequences, and similar reagents which, through specific binding or chemical reactions with substances in a specimen, are intended for use in a diagnostic application for identification and quantification of an individual chemical substance or ligand in biological specimens. ASRs are medical devices that are regulated by FDA. They are subject to general controls, including current Good Manufacturing Practices (cGMPs), 21 CFR Part 820, as well as the specific provisions of the ASR regulations (21 CFR 809.10(e), 809.30, 864.4020).

The guidelines set by FDA for marketing the ASRs are known as “The ASR Rules”. The rule classifies most ASRs as Class I devices subject to general controls under section 513(a)(1)(A) of the Act, but exempt from premarket notification.

To read more about the ASR Rule, follow the link.

Comments

Popular posts from this blog

Amendments for High Risk Device Type Regulatory Pathway

BayBiotech.NET Government Accounting Office (“GAO”) has issued a long-awaited report evaluating the use of the 510(k) process by the Food and Drug Administration (“FDA” or the “Agency”) in the January of 2009. Report mainly focused on Preamendment class III devices. Although most high-risk class III medical devices are subject to the demanding premarket approval (“PMA”) process, preamendment class III devices may be cleared through the 510(k) pathway until FDA issues regulations requiring a PMA. Under the Safe Medical Devices Act of 1990, FDA was required either to reclassify preamendment class III devices into class I or II, or (2) issue regulations requiring PMA approval for the devices, GAO noted that 20 preamendment class III device types have not yet been addressed by the Agency. GAO has urged FDA to take required steps to address the remaining class III devices that continue to be eligible for 510(k) review. As a result of the report, FDA has committed to address al...

Harmonization by Doing (HBD): Japan & U.S. Collaboration

BayBiotech.NET HBD is an international cooperative effort by Japan and US for regulatory convergence for Medical Devices. The efforts are focused on to develop global clinical trials and address regulatory barriers for timely device approvals. To address the needs for additional evaluation, the HBD initiative is a pilot project launched jointly by FDA and MHLW-PMDA for the premarket review of device cardiovascular technology. Instead of taking a theoretical approach to harmonization, HBD is focused on Proof of concept by utilizing parallel development, application submissions and review of actual medical device projects. HBD Study intends to collect and analyze regulatory submission data from multiple applications in the U.S. and Japan. The purpose of the study is to further understand differences that may exist with format and content, to define best practices and to improve globally harmonized processes. To read more about the HBD program, follow the link: http://www.fda.gov/M...

What to include in Traditional 510(k) Filing for Medical Devices

BayBiotech.NET A 510k is a premarket submission made to FDA to demonstrate that a medical device to be marketed is at least as safe and effective, that is, substantially equivalent, to a legally marketed device. A Traditional 510(k) submission must include the required elements as per 21 CFR 807.87 (Information required in a premarket notification submission):  the name of device, (the trade or proprietary name), if any, and the common or usual name or classification name of the device.  description of the device, include device specifications and reference applicable guidance documents, special controls, or standards; photographs or engineering drawings should be supplied, if applicable.  comparison with a predicate device(s), indicating similarities and/or differences accompanied by data, as appropriate; this information may include an identification of materials, design considerations, energy expected to be used or delivered by the device, and a description of the operatio...